The Only Patent Protected Catalytic Converter Cleaner
Not finding the answer your looking for? Click the support tab in the above menu for more expansive support, or feel free to call us on 0800 4657 5869.
Follow these simple instructions:
1. Make certain that you have ¼ of a tank of fuel in your tank (3-4 gallons)
2. Pour entire contents (475ml) of Cataclean into the fuel tank.
3. Drive vehicle for 10 -15 miles
Your "check engine" or "service engine" light has come on. Your MPG (miles per gallon) has declined. Your engine is sluggish. You may fail your "emissions test".
It is recommended that one bottle of Cataclean (16.7 fluid ounces) is introduced into your fuel tank, once every three months. If your vehicle is subjected to a lot of stop and start or minimal highway miles, you may consider adding every 60 days.
Yes. Cataclean has been extensively tested over the last 10 years by Industry Experts and is safe for use in both diesel and petrol engines and dual-fuel engines.
Check engine lights are often triggered due to carbon build up on the oxygen sensors and within the catalytic converter or mechanical failure of one or both of these components. Your mechanic will refer to this as a PO420 code. In the case of mechanical failure of the oxygen sensors or disintegration of the substrate within the catalytic converter, nothing, not even Cataclean will address this…you must replace the part. In the case of carbon build up and not mechanical failure, Cataclean has been proven to remove carbon build up which has resulted in turning the check engine light off.